WHEN SHIPPING OR INSTALLING INTO EXISTING
BUILDINGS. THE POWERLIFT RESIDENTIAL
DUMBWAITER (PATENT No. US 6,167,670 B1) IS
MFG. IN THREE PIECES. TO INSTALL: POSITION
BOTTOM UNIT - ALIGN STACKING PINS, AND SET
MIDDLE UNIT IN PLACE. REPEAT WITH TOP UNIT.
WITH ALL THREE UNITS IN PLACE ATTACH
CHAIN WITH MASTER LINKS TO TOP AND
BOTTOM OF TROLLEY. MACHINE IS READY TO
RUN.

STANDARD FEATURES

SAFETY FEATURES: DOOR SAFETY SWITCHES PREVENT MACHINE
FROM RUNNING IF ANY DOOR IS NOT CLOSED. WILL STOP MACHINE
IF ANY DOOR IS OPENED WHILE RUNNING.
NOTE KEY ON/OFF LOCK IS AVAILABLE TO TURN ALL POWER OFF
TO DUMBWAITER WHEN ADULTS ARE NOT AT HOME.
NOTE: DOOR INTER -LOCKS ARE AVAILABLE IF REQUIRED, CALL
FOR PRICES).

RESIDENTIAL DUMBWAITERS SHALL BE A SELF SUPPORTING
STRUCTURE. SHAFT SHALL BE WELDED .065 SQUARE TUBING FRAME,
INSIDE LINING SHALL BE NO. 26 GA. GALVANIZED SHEET METAL.
ALL JOINTS SHALL BE LAPPED AND SCREWED TO CONTINUOUS .065
GA. STEEL TUBING. 26 GA. SHEET METAL SHALL BE BACKED WITH
ONE INCH INSULATION. THE OUTSIDE LAYERS OF THE WALL SHALL
BE APPROVED FIRE-RESISTIVE WALL CONSTRUCTION. (5/8 TAPE
SHEET ROCK) (IF REQUIRED SEAL JOINTS WITH 3M FIRE BARRIER
CP 25 WB , OR 3M FIRE BARRIER).

CAPACITY: 100 LBS
BELT AND CHAIN DRIVE. #41 ROLLER CHAIN (ULTIMATE
BREAKING STRENGTH 2640 LBS).
CARRIAGE SLIDES ON DUAL HEAVY ANGLE TRACKS.
HEAVY DUTY U.H.M.W. GUIDES.
ADJUSTABLE FRICTION CLUTCH - SOLENOID BRAKE.

CONTROLS: THE ONLY CODE ELECTRICAL WIRING
REQUIRED IS A SINGLE 110 VOLT CIRCUIT.

ALL OTHER WIRING IS LOW VOLTAGE AND INSTALLATION
CAN BE ACCOMPLISHED BY ANY COMPETENT CRAFTSMAN
ALL PUSH BUTTONS CONTROLS AND DOOR SAFETY
SWITCHES FURNISHED.

WARRANTY: 5 YEARS ON MOTOR AND ALL PARTS,
UNDER NORMAL USE.

IMPORTANT

PLEASE SUBMIT THIS DRAWING AND
ANY OTHER PERTINENT INFORMATION
ON OUR DUMBWAITER TO YOUR LOCAL
BUILDING DEPARTMENT.